Simpson CILVFS3KT Fast Setting Low-Viscosity Structural Injection Epoxy - 3 Gallon Bulk Kit Bulk Loose Self-Drilling Screws Install the DJT at the

Install the DJT at the intersection of the 2x deck joist and 4x or larger support

No predrilling required

promoting balanced load distribution

and chemically aggressive job sites

the THASR29Z hangers can be field skewed from 22 1/2 degrees or up to 75 degrees (up to 85° for the THASR/L29 and THASR/L29-2)

Simpson CILVFS3KT Fast Setting Low-Viscosity Structural Injection Epoxy - 3 Gallon Bulk Kit Bulk Loose Self-Drilling Screws Install the DJT at theCI LV FS Fast Setting Low Viscosity Structural Injection Epoxy is a two component, high modulus, high solids, moisture tolerant epoxy specially designed for pressure injection of concrete cracks and for increasing the bond between freshly placed repair mortars or concrete mixes and existing concrete when substrate temperatures are between 40F (4C) to 90F (32C). This epoxy kit comes with (2) 1 US gallon (3. 8 L) cans of Component A (CILV1A) and 1 US