Bulk #10-32 Phillips Flat Taptite Alternative Thread-Rolling Screws – Zinc Bake + Wax – Monster Bolts Panhead Drive: Phillips #2 cross recess—works

Drive: Phillips #2 cross recess—works with manual

Finish: Zinc Yellow CR+6 Plating (5 microns thick)

are crafted from A4 (316) stainless steel

thanks to the hardening process that enhances their mechanical properties throughout the entire material

The metal is passivated & wax-coated for a clean surface

Bulk #10-32 Phillips Flat Taptite Alternative Thread-Rolling Screws – Zinc Bake + Wax – Monster Bolts Panhead Drive: Phillips #2 cross recess—worksMonster Overview: Achieve a flush, vibration resistant joint with #10 32 Phillips Flat Head Taptite Alternative Screws from Monster Bolts. The tri lobular thread rolling point forms precise internal threads on drive inno tapping, no chipswhile the 82 countersunk head sits perfectly flush for snag free surfaces. Each case hardened steel fastener is CR+3 clear zinc plated, bake relieved to remove hydrogen embrittlement, then finished with a factory dry